Roll over or click image to zoom in
RGV+pallet transfer+hoist linkage
$0.00
This equipment is mainly aimed at the transfer and transportation of materials between factory floors, etc. The system mainly includes, RGV rail car part, reciprocating elevator, roller conveyor,...
This equipment is mainly aimed at the transfer and transportation of materials between factory floors, etc. The system mainly includes, RGV rail car part, reciprocating elevator, roller conveyor, etc.
One RGV rail car introduction:
1. RGV is a track-guided vehicle. It is guided by guide rails on the running route and has automatic electrical control throughout the process, which can meet high-precision docking. Due to the limitation of the track, RGV is not as flexible and intelligent as the automatic guided vehicle AGV.
2. RGV trolleys do not require manual handling of goods, reducing the workload of warehouse managers and improving labor productivity. At the same time, the application of shuttle vehicles can make the logistics system simple and efficient.
3. The RGV trolley has strong ability to resist external interference, the control system is simple, and the requirements for operators are relatively broad, and the operators do not require high technical skills.
4. The RGV track trolley has high reliability and low failure rate, which greatly reduces subsequent maintenance work, has high work efficiency and greatly saves manpower.
5. The RGV rail-operated trolley has strong carrying capacity and is suitable for transporting heavy workpieces. The current mainstream RGV trolley in the market has a carrying capacity of about 1.5T, which is much higher than that of AGV.
6. The RGV/right rail trolley runs fast. Its loaded traveling speed is 0.5-0.9m/s, and its unloaded traveling speed is 1.0-1.2m/s. The S-travel trolley has low manufacturing and use costs and is widely used. Although the RGV is not as flexible as the automatic guided vehicle AGV, the manufacturing cost is not as high as the AGV; it is not as delicate as the AGV, and the RGV production run time is very long. Therefore, it is widely used in the handling industry and frequently appears on the assembly line of workshop handling.
The current automation of window mortar operation not only makes the workshop look high-end, enhances the company's image, but also demonstrates the charm of being in line with the times.
There are two modes of RGV: manual and automatic. Normally, in the automatic mode, all tasks sent by the computer to the execution layer are scheduled, and the goods are transferred from one interface to another in accordance with the instructions. The manual mode is to control the RGV/car electronically, and rely on the buttons of the remote control to realize every action of the RGV car: forward, backward, left, right, etc.
The main application scenarios of RGV
The RGV rail shuttle car can be used in various high-density storage warehouses. The track channel of the RGV rail shuttle car can be designed to be of any length and can be adapted to warehouse storage of various depths. The RGV trolley can run quickly in the roadway, and there is no need for a forklift to drive into the roadway when storing and withdrawing goods, which has higher safety and effectively improves the operating efficiency of the warehouse.
If the ends of different conveying lines are compared to ferries, then RGV plays a role similar to a ferry boat in the entire conveying process, connecting different conveying lines in the transportation route. It is widely used in long-distance transportation and complex interconnection between multiple delivery ports that need to solve costs.
Two: Pallet library
The stacker is a pallet separator structure that controls the pallets to fall on the chain conveyor line. The separator structure can automatically adjust the width according to the different sizes of the pallets. After the pallets are separated, they are transported to the palletizing robot via the chain plate line. .
Automatic pallet feeding machine (including 10 pallets)
-Product Description
-After the forklift puts the empty pallet on the conveyor, the cylinder of the left and right mechanism of the horizontal insert plate moves to insert the second pallet at the bottom, and then the lifting cylinder rises to lift the second and above pallets, and the bottom pallet is conveyed out. At this time, the first The first pallet is supplied to the stack, the lifting cylinder is lowered again to place the rest of the pallets on the conveying surface, the cylinder of the left and right mechanism of the horizontal inserting plate is pulled out, the lifting cylinder rises and inserts the second pallet, and the lifting cylinder rises again until it is separated from the bottom pallet, and the conveying starts. The conveyor line transports the pallet out, repeats the above actions to supply all the pallets, and then supplies the next stack of pallets.
Technical parameters and main equipment configurations
1. Stacking speed: ≥3 pieces/minute, 10 trays can be placed at a time
2. Power supply: 220V50Hz
3. Power component: motor
4. Sensor: Omron
5. Cylinder: Airtac
6. Bracket: steel welding, paint spraying
7. Tray size: 1200mm*1200mm Thickness: 150mm
8.Conveying method: provided by the buyer
Three: Overview of reciprocating hoist products:
A variety of equipment can be flexibly combined and arranged flexibly to make the transportation more efficient and smooth
Efficiently connect vertical conveyor systems between different heights
The reciprocating elevator is suitable for transporting goods between multiple floors. It can be connected to a variety of automated conveying equipment and can achieve fully automated operations. Equipped with a variety of safety devices, it has the characteristics of high conveying efficiency, high precision and high stability.
The main parameters
●Maximum conveying height: 50 meters.
●Maximum load: 5000kg.
●Lifting speed: 15, 30, 45, 60, 75, 90 (m/min).
●Equipment peripherals: steel wire mesh, steel plate, color steel plate, organic glass, tempered glass.
●Standard painting color: Default medium gray, can be customized.
●Conveying opening direction: E type/Z type/L type.
Features
●High conveying efficiency and smooth operation;
*The maximum conveying capacity can reach 90 pallets per hour;
●Diversification of transported goods:
W800-2000mm
L800-4000mm
H150-4000mm
●High-precision leveling error: ±0mm
●Achieve fully automatic control, and can cooperate with AGV trolleys and conveyor lines to achieve fully automatic transportation;
Customers need to provide parameters
1. The number of floors where the elevator stops and the direction of entrance and exit
2. Increase cargo weight, size, and speed
3. Improve product characteristics: pallets, or others
4. Product pickup methods: forklift, ground cow, AGV, cart
5. What is the total lift height of the hoist?
6. Whether the hoist has a pit and whether the installation location is inside the shaft
7. Elevator entrance and exit docking method: roller, chain or other conveyor
8. Hoist operating environment and material requirements
9. Surrounding sealing plates: stainless steel, carbon steel plate, wire mesh, acrylic
10. Does the elevator have a rolling shutter door?
11. Whether to wear anti-fall device
12. Top installation space
One RGV rail car introduction:
1. RGV is a track-guided vehicle. It is guided by guide rails on the running route and has automatic electrical control throughout the process, which can meet high-precision docking. Due to the limitation of the track, RGV is not as flexible and intelligent as the automatic guided vehicle AGV.
2. RGV trolleys do not require manual handling of goods, reducing the workload of warehouse managers and improving labor productivity. At the same time, the application of shuttle vehicles can make the logistics system simple and efficient.
3. The RGV trolley has strong ability to resist external interference, the control system is simple, and the requirements for operators are relatively broad, and the operators do not require high technical skills.
4. The RGV track trolley has high reliability and low failure rate, which greatly reduces subsequent maintenance work, has high work efficiency and greatly saves manpower.
5. The RGV rail-operated trolley has strong carrying capacity and is suitable for transporting heavy workpieces. The current mainstream RGV trolley in the market has a carrying capacity of about 1.5T, which is much higher than that of AGV.
6. The RGV/right rail trolley runs fast. Its loaded traveling speed is 0.5-0.9m/s, and its unloaded traveling speed is 1.0-1.2m/s. The S-travel trolley has low manufacturing and use costs and is widely used. Although the RGV is not as flexible as the automatic guided vehicle AGV, the manufacturing cost is not as high as the AGV; it is not as delicate as the AGV, and the RGV production run time is very long. Therefore, it is widely used in the handling industry and frequently appears on the assembly line of workshop handling.
The current automation of window mortar operation not only makes the workshop look high-end, enhances the company's image, but also demonstrates the charm of being in line with the times.
There are two modes of RGV: manual and automatic. Normally, in the automatic mode, all tasks sent by the computer to the execution layer are scheduled, and the goods are transferred from one interface to another in accordance with the instructions. The manual mode is to control the RGV/car electronically, and rely on the buttons of the remote control to realize every action of the RGV car: forward, backward, left, right, etc.
The main application scenarios of RGV
The RGV rail shuttle car can be used in various high-density storage warehouses. The track channel of the RGV rail shuttle car can be designed to be of any length and can be adapted to warehouse storage of various depths. The RGV trolley can run quickly in the roadway, and there is no need for a forklift to drive into the roadway when storing and withdrawing goods, which has higher safety and effectively improves the operating efficiency of the warehouse.
If the ends of different conveying lines are compared to ferries, then RGV plays a role similar to a ferry boat in the entire conveying process, connecting different conveying lines in the transportation route. It is widely used in long-distance transportation and complex interconnection between multiple delivery ports that need to solve costs.
Two: Pallet library
The stacker is a pallet separator structure that controls the pallets to fall on the chain conveyor line. The separator structure can automatically adjust the width according to the different sizes of the pallets. After the pallets are separated, they are transported to the palletizing robot via the chain plate line. .
Automatic pallet feeding machine (including 10 pallets)
-Product Description
-After the forklift puts the empty pallet on the conveyor, the cylinder of the left and right mechanism of the horizontal insert plate moves to insert the second pallet at the bottom, and then the lifting cylinder rises to lift the second and above pallets, and the bottom pallet is conveyed out. At this time, the first The first pallet is supplied to the stack, the lifting cylinder is lowered again to place the rest of the pallets on the conveying surface, the cylinder of the left and right mechanism of the horizontal inserting plate is pulled out, the lifting cylinder rises and inserts the second pallet, and the lifting cylinder rises again until it is separated from the bottom pallet, and the conveying starts. The conveyor line transports the pallet out, repeats the above actions to supply all the pallets, and then supplies the next stack of pallets.
Technical parameters and main equipment configurations
1. Stacking speed: ≥3 pieces/minute, 10 trays can be placed at a time
2. Power supply: 220V50Hz
3. Power component: motor
4. Sensor: Omron
5. Cylinder: Airtac
6. Bracket: steel welding, paint spraying
7. Tray size: 1200mm*1200mm Thickness: 150mm
8.Conveying method: provided by the buyer
Three: Overview of reciprocating hoist products:
A variety of equipment can be flexibly combined and arranged flexibly to make the transportation more efficient and smooth
Efficiently connect vertical conveyor systems between different heights
The reciprocating elevator is suitable for transporting goods between multiple floors. It can be connected to a variety of automated conveying equipment and can achieve fully automated operations. Equipped with a variety of safety devices, it has the characteristics of high conveying efficiency, high precision and high stability.
The main parameters
●Maximum conveying height: 50 meters.
●Maximum load: 5000kg.
●Lifting speed: 15, 30, 45, 60, 75, 90 (m/min).
●Equipment peripherals: steel wire mesh, steel plate, color steel plate, organic glass, tempered glass.
●Standard painting color: Default medium gray, can be customized.
●Conveying opening direction: E type/Z type/L type.
Features
●High conveying efficiency and smooth operation;
*The maximum conveying capacity can reach 90 pallets per hour;
●Diversification of transported goods:
W800-2000mm
L800-4000mm
H150-4000mm
●High-precision leveling error: ±0mm
●Achieve fully automatic control, and can cooperate with AGV trolleys and conveyor lines to achieve fully automatic transportation;
Customers need to provide parameters
1. The number of floors where the elevator stops and the direction of entrance and exit
2. Increase cargo weight, size, and speed
3. Improve product characteristics: pallets, or others
4. Product pickup methods: forklift, ground cow, AGV, cart
5. What is the total lift height of the hoist?
6. Whether the hoist has a pit and whether the installation location is inside the shaft
7. Elevator entrance and exit docking method: roller, chain or other conveyor
8. Hoist operating environment and material requirements
9. Surrounding sealing plates: stainless steel, carbon steel plate, wire mesh, acrylic
10. Does the elevator have a rolling shutter door?
11. Whether to wear anti-fall device
12. Top installation space
